STANDARD C-500

STANDARD C-500

The STANDARD C-500 receives and transmits between 144Mc to 146Mc and 430 to 440Mc (extendable). Despite its age the STANDARD C-500 still often can be heard on hamradio VHF- and UHF-frequenciess. This portable was built for long-term usage. Even some commercial users use them for their jobs.

It is a hamradio portable, built in the 1980es. Price for new ones in 1988 was 1000 Deutsche Mark. Used ones have been sold in 2010 for round about 150 Euros.

The STANDARD C-500 receives and transmits between 144Mc to 146Mc and 430 to 440Mc (extendable). Despite its age the STANDARD C-500 still often can be heard on hamradio VHF- and UHF-frequencies. At the same time as the C-500 STANDARD was released, the C-120, a monoband-transceiver for 2m and the C-420, a mono-transceiver for 70cm were available in the hamradio-stores. Technical details, look and features do agree with the C-500. The only difference in usage: The STANDARD C-500 has a 12,5kHz-step. The C-120 and C-420 do not have a 12,5kHz step. Handling of the STANDARD C-500 is great. It is a solid and robust portbale.

Handhabung

STANDARD C-500 is a very robust and long-lasting hamradio portable. Easy to handle. A real survivor.

Security-note for STANDARD C-500

The capacitor C-273 frequently gets broken and causes a short cut in the supply of the AF-circuit. This leads to a damage of the voltage regulation of the audio-amp. When this happens the audio-amp circuit will be suplied with full operating voltage. To avoid this damage, please exchange capacitor C-273. It is a usuall cap with 100µF and 10V.

Handfunkgerät Ende der 1980er Jahre

Technical details

TX-range144-148MHz und 430-440MHz ( erweiterbar )
Receiver rangeRX: ca. 144-148MHz und 430-440MHz( erweiterbar )
ModeTX: FM mit maximal +-5kHz Hub; RX: FM
Crossband oparationangeblich ja
rf-outputmax. 5W
power-steps3
Sensitivity Squelchca. 0,16µV bei 12dB SINAD
Voltage range input6 bis 16V DC
Current consumption RXunknown
current consumption TXmaximal 1,3A
audio-output400mW an 8Ohm
steps5, 10, 12,5, 25kHz
tone-call1750Hz
DTMFmit Zusatzplatine
Display illiminationja
CTCSSmit Zusatzplatine
Measurement WxHxDunknown
backsidemetall
FrontKunststoff
antenna connectorBNC
connector external mikeKlinke, 3,5mm und 2,5mm
external supplyüber seitliche Hohlbuchse
weightca. 500g
Overview technical details
STANDARD C-500 mit HF-Verstärker

Accessories

Batteriefach für AA-ZellenCNB-111 (! nicht mehr lieferbar !)
CTCSS-unitCTN-500 (! nicht mehr lieferbar !)
DTMF-unitCTD-500 (! nicht mehr lieferbar !)
table accessoires

Technical documents

Comments and diskussion

alf Wilkin am 2011-03-09 20:07

Für mein Handfunkgerät suche ich folgende Akkus . Laut den Original Unterlagen haben sie folgende Bezeichnungen :
– CNB-120 13,2 Volt NiCd Akku
– CNB-111 9,6 Volt NiCd Akku
– CNB-121 7,2 Volt NiCd Akku
– CBC-11 Ersatz Batteriekasten

Meine Fragen an Sie :Haben Sie noch einen der oben genannten Akkus ? Wenn ja , wie teuer sind die einzelnen Akkus ?

Es können natürlich auch baugleiche Akkus sein . Am interessantesten wäre für mich der Ersatz-Batteriekasten CBC-11 .

MfG
Ralf Wilkin

Matthias Tafelmeyer am 2011-03-10 06:39

Hallo OM Ralf,
leider sind sowohl die Batteriefächer als auch die Akkupacks nicht mehrverfügbar. Wenn noch ein altes Akkupack vorhanden ist, dann können wir die alten Akkus daraus entfernen und neue installieren. Hierfür benötigen wir von Ihnen ein altes Akkupack.

KHS DK8JG am 2011-12-18 13:22

Hallo !
Da ich noch zwei C-500 hier im Einsatz habe
suche das CTCSS Modul CTN-500n dafür.
Vielleicht gib es auch ein Nachbau.
Über eine Antwort würde ich mich sehr
freuen.
vy 73 de Karl-Heinz, DK8JG

Matthias Tafelmeyer am 2011-12-18 15:19

Hallo Karl-Heiz,
das CTN-500 wird relativ stark nachgefragt, ist jedoch weltweit leider nicht mehr lieferbar.

Andreas Führmann DC3 am 2011-12-30 08:42

Hallo Matthias,

gibt es vielleicht die Möglichkeit, das von Dir angebotene CTSS Modul für das C-528 an das C-500 anzupassen?
Gerade weil die Nachfrage doch so groß ist…
Wäre klasse.

vy 73, Andreas DC3AFA

Matthias Tafelmeyer am 2011-12-30 12:09

Hallo Andreas,
im Prinzip eine gute Idee, unser CTCSS-Modul für das C-500 anzupassen. Aber: In den letzten Jahren habe ich das seltene original CTN-500 noch nicht mal gesehen. Wir wissen über das Modul und die Ansteuerung daher gar nichts. Genau so ein Original CTCSS-Modul würden wir jedoch brauchen um einen Nachbau oder eine Anpassung zu realisieren.

4 thoughts on “STANDARD C-500

  1. I’m looking for information

    to repair a c 500

    poor VHF and UHF sensitivity

    73 Alex

    1. Dear Alessandro,
      you will find schematic and more on elkoba-website. Please have a look on internal oin and joins of Antenna. Reason for weak RX might be a broken connection.

  2. Hallo Matthias, ich besitze noch ein altes Standart C500 und 2 defekte Stadart-Teile C528. Gibt es einen Nachfolger, der die Standartgeräte repariert? Danke für die Info und für die Bemühungen – vy73 de df3uc

    1. Hallo Alfons, leider ist mir aktuell kein Nachfolger für die Reparaturen bekannt.
      73

Leave a Reply

Your email address will not be published. Required fields are marked *