In the middle of the 1990es the C-468 was released as replacement of the C-458. It is a mono-band radio for 70cm. In functional und optical construction it is identical to the 2m mono-bander C-168. On the market there are two types of this radio: C-460 and C-468. The C-460 was designed for US-markets without tone-call and a different frequency-setting. The C-468 was designed for european market and has 1750Hz tone-call on board for repeater operation.
Frequent problems on STANDARD C-468 are old capacitors. Those can be renewed if you havesome experience in repairing SMD-parts. We no longer provide service for C-460 and C-468 because price for repair often is higher than the used-price for complete radios.
Technical details
TX-range | 430bis 440MHz nur FM |
Receiver range | 430bis 440 MHz sowie |
Mode | Sender: FM mit maximal +-5kHz, Empfänger in AM |
Crossband oparation | no |
rf-output | unknown |
power-steps | unknown |
Empfindlichkeit 12dB SINAD | ca. 0,16µV |
Voltage range input | 6 bis 16V |
Current consumption RX | ca. 30mA bis 150mA, je nach Modus |
current consumption TX | ca. 1,5A |
audio-output | ca. 200mW |
steps | 5kHz, 10kHz, 12,5kHz |
tone-call | 1750Hz |
DTMF | ja -ab Werk |
Display illimination | ja, Mini-Glühlampe |
CTCSS | ja mit Zusatzplatine |
Measurement WxHxD | unknown |
backside | metall |
Front | Kunststoff |
antenna connector | BNC |
connector external mike | Klinke, 3,5mm und 2,5mm |
external supply | über Hohlbuchse, POLUNG BEACHTEN |
weight | ca. 150g |
Accessories
Batteriefach für AA Zellen | CBT-160 |
Batteriepack mit 12V | CNB-162 |
CTCSS-unit | CTN-160 |
Speichermodul | CMU-160 und -161 |
Freqeuently asked questions
How to reset?
- F + 0, F + 3, F + 0, F + 1
- Taste „Func“ und Taste „0/SET“ drücken
- Taste „Func“ und Taste „3/SFT“ drücken
- ein kleiner Punkt erscheint im Display
- Taste „Func“ und Taste „0/SET“ drücken
- Taste „Func“ und Taste „1/PO“ drücken
- Display schaltet kurz ab, Gerät piept kurz, Speicher sind gelöscht, Reset ist durchgeführt